GT1 ULTIMATE 3/32 sn LP ??

doggedly · 发表于 2018-11-09 07:00:55

I buy GT1 ULTIMATE 3/32 with sn LPN1GBME10779.
Anybody seen thats serial number??

Problem:
USB Burning Tool not work i check v208 209 216.
When start (with Erase Flash/Normal Erase and Erase Bootloader) i have error message: Romcode/Initialize DDR/Read initialize status/USB Control Setup Error.

When start (without Erase Flash/Normal Erase and Erase Bootloader) i brick device. If i connect device in USB Borning Tools nothing happened. LED blink and nothing, HDMI no signal, Reset not work... Dead?

Anyway... Serial LPNXXXXXXXX what is this ?
GT1 Ultimate 3/32 with serial number starting with "A" - working on IMG from GT1 "Classic" 2/16...

1. What image and software to use for the serial number LPNXXXXXXX ????
2. HOW TO UNBRICK my device?

vintage1981 · 发表于 2018-11-09 22:25:48

hello .
Try it:
-Download https://beelink-my.sharepoint.co ... MAdjVQuKNA?e=tkA38O
-download https://chinagadgetsreviews.com/ ... d_maker-v2-0-2.html
-after being lost, save rom on the sd card
-next place the SD card in adroid box
-next connect hdmi
- take the needle and press the reset button while holding the power connection

luckyluca · 发表于 2018-11-10 04:30:11

I have the same problem...
same kind of serial number
i tried upgrade with micro sd card and it instantly bricked my device and when i try with usb burning tool, it fails at 2% with error code 0x10105002

i'm sooo disappointed. i thought beelink gt1 ultimate was a good device...

luckyluca · 发表于 2018-11-10 13:27:47

i read this thread http://www.bee-link.com/forum.ph ... &extra=page%3D1
and it seems ok now
with the good firmware !

i used usb method

my beelink gt1 ultimate is alive ! ALIVE !
:D

vintage1981 · 发表于 2018-11-10 16:58:14

I too ,but method sd , me too usb Burnig Tool stop at 2% .

doggedly · 发表于 2018-11-10 20:46:43

It tests this ROM (709N1) and the new version of the GT1 Ulitmate device (LPN1 sn) for several days.
So far, we've been using about 200 pcs GT1 2/16 "Classic" (sn A912 / S912) with ROM 111MO (Android 6.0).

Unfortunately, you can see a perceptible difference. It's worse on the new device / ROMs.

Our devices GT1 2/16 (111MO) have been working for a year in 24/7 mode. They display video materials non-stop and there is no problem with them.

Here (LPN1 / 709N1) once you can see that the video is not so smooth. In addition, after a few hours of operation, the device is "clogged".

At the moment, Beelink will be very weak in his opinion ... In my opinion it is a matter of refining the ROM, but also a lack of respect for customers - by spending such a thing. Invest in system engineers!

It can not be that you do such things to people who have trusted you and based their own business on your devices.
I think you create a new device for it to be better? New processor, more faster memory. The effect - pathetic. In my opinion, you cheat people by calling the same device!

Koets · 发表于 2018-12-05 06:22:00

http://www.bee-link.com/forum.ph ... &extra=page%3D1

Just flashed this fw, using the prescribed SD-card method, 100% complete, but same build nr etc.

Same problems, still "no signal" and/or blinking black/blue screen.!

Pls help.

Koets · 发表于 2018-12-05 07:35:11

vintage1981 replied at 2018-11-09 22:25
hello .
Try it:
-Download https://beelink-my.sharepoint.com/:f:/g/personal/firmwareservice_beelink_ ...

Tried this as well, also does not work, same problems.

Koets · 发表于 2018-12-17 07:07:23

still no answer and no solution!