GT1 Ultimate: Bricked or Dead?

ck68310

Hi,

Here is my problem.

After a flash with USB Burnig Tool, my BeelinK GT1 ULTIMATE is brickedwith the new firmware:

- no signal HDMI

- not recognized by WINDOWS(short pins already tried  3x = no resulton windows)

-

BUT.... The LED sometimes on, sometimes off (power raccording / or USB-PCraccording)

It's Really Bricked?? Or Dead?

How to put back the last firmware if USB Burning Tool does notrecognized box?

Thank you

---- ----FRENCH --------

Salut,

Voici mon problème.

Suite à un flash avec USB Burnig Tool , ma BeelinK GT1 ULTIMATE estbrickee avec le nouveau firmware:

-Pas de signal HDMI

-Non reconnue par WINDOWS (court circuit déjà essayé 3x = pas derésultat)

-LED PARFOIS allumée, parfois eteinte.

Comment remettre l'ancien firmware si USB Burning Tool ne reconnait pasla box?

Merci

kemor

IS TOTAL DEAD.....

beelink

Hi
Please provide the S/N code on the back of the machine and the firmware used by the brush. Based on your feedback, we will provide the corresponding solution.

best regards

ck68310

beelink replied at 2018-11-09 18:06
Hi
Please provide the S/N code on the back of the machine and the firmware used by the brush. Based  ...

(S/N : LPN1GBMS60129)

Firmware injected:
http://freaktab.com/forum/tv-pla ... 7-standard-ultimate

Thanks

kemor

My Beelink is   S/N: A706DOSBH90472  32G
                         GT-T-D 3G+32G
                          GT1-706DO

beelink

kemor replied at 2018-11-12 01:01
My Beelink is   S/N: A706DOSBH90472  32G
                         GT-T-D 3G+32G
                     ...

hi
The firmware you are using is correct. An error may be caused by an incorrect method. Please try the latest firmware in the link below and follow the tutorial again.
http://www.bee-link.com/forum.ph ... amp;extra=#pid54663

best regards

beelink

kemor replied at 2018-11-12 01:01
My Beelink is   S/N: A706DOSBH90472  32G
                         GT-T-D 3G+32G
                     ...

hi
The firmware you are using is correct. An error may be caused by an incorrect method. Please try the latest firmware in the link below and follow the tutorial again.
http://www.bee-link.com/forum.ph ... amp;extra=#pid54663

best regards

ck68310

And me?? Thanks

luckyluca

http://www.bee-link.com/forum.ph ... &extra=page%3D1

with S/N LPN1, use the last firmware : GT1_709N1_AP6255.img

i didn't find any other "alternative" firmware working on the LPN1 serie.
(maybe S912_atvXperience_v2FF LPDDR)

ck68310

Encore faut il pouvoir le flasher!
Sans reconnaissance USB, et sans HDMI, c'est compliqué.