I have break my X55

percussio

I try to install debian on X55 and i have blank screen.

After this i go to the bios and i have modified some option.
Now i have no display and i can't go to the bios.

there is a reset on the box or can i repair this ?

best regards

beelink

hi
1. Gemini X does not support Debian system for the time being. If the demand is high, we will debug the compatible Debian system.
2. If you can't enter the BIOS to change the settings, please try to open the bottom of the machine, unplug the CMOS battery, short the CMOS battery connector on the motherboard with metal objects for about 30 seconds, then install the battery and reboot, then the BIOS will Go back to the original state that was not set.

best regards

percussio

Hi,

Thanks for your answer.
It's work now with only remote battery connector.
i hope debian can be installed in the future, is a good machine but window is slow.

Best regards