Clean installation Windows 10 1803

jorensanbar · 发表于 2018-09-13 12:40:09

Goodnight,

I've been with the Gemini X45 Premium for two days, but every time I look for information from the fan, it says it does not exist, but it's still working.

So I think, that the fan is not connected to Windows, and you can not see the speed, and switch to manual plans.

My question is this: If I do a clean installation of Windows 10 build 1803, the fan having no drivers, could stop working?

Or is there no problem installing my version of Windows 10, with my ISO image?

Thank you.

Pd. Sorry for bad english.

beelink · 发表于 2018-09-14 10:19:16

hi jorensanbar
The driver for managing the fan is burned on the BIOS. It has nothing to do with the operating system. You can install the operating system with ISO, but you may lose the driver and you need to install the driver yourself.
Good Luck

jorensanbar · 发表于 2018-09-17 00:00:46

beelink replied at 2018-09-14 10:19
hi jorensanbar
The driver for managing the fan is burned on the BIOS. It has nothing to do with the ...

Thank you.

I downloaded the file "Gemini X45 X55 Driver.rar" found in this forum.

There comes a driver called Thermal Intel. With that would be enough to put the FAN back into operation ?, after an installation of the Windows 10 ISO

beelink · 发表于 2018-09-17 15:01:27

jorensanbar replied at 2018-09-17 00:00
Thank you.

I downloaded the file "Gemini X45 X55 Driver.rar" found in this forum.

a sorry，The speed of the fan is automatically adjusted according to the temperature of the machine. The management driver of the fan is burned on the BIOS. In order to avoid the user's operation error, the machine is damaged, so the fan cannot adjust itself.