Broadcom 802.11abgn Wireless SDIO Adapter will not start with Windows 10 v1607

ltheONEl

Broadcom 802.11abgn Wireless SDIO Adapter will not start with Windows 10 v1607,  I am getting error code 10 in device manager for this device after getting the update to work.


Can someone at please do a full 64bit build of windows 10 anaversary OS with all devices working.  taken me all nigh to get everything working with the major exception of the wifi card it simply refuse to start!

TheVogon

Plissken replied at 2016-09-28 21:25
and that is not 'in the Bios the problem, but I do not think, I've got two and the other works and h ...

Hi,

the solution to this problem is to copy the file bcm943341wlagb.txt from the file "Beelink BT3 X32bit X64bit Driver Download 20160720 update" to C:\Windows\System32\Drivers and to reboot.

It does say this in the included text files - basically Beelink haven't properly packaged / regionalised the driver so you need to do it manually.

poul54

albertoglezc replied at 2016-09-23 17:47
poul54, the first link (the drivers link) it's the BIOS v16 link. Can you provide the correct driver ...

sorry  here you go  https://mega.nz/#F!XQMGyIKC!YeFd_SfoKs43m1wFXxaghA

poul54

albertoglezc replied at 2016-09-23 19:37
Thanks poul54, I will try it, but I think it's the same driver I tried about a couple of days ago. ...

install the bluetooth driver    the drivers provided from beelink has installer for bluetooth

albertoglezc

Yes, NUC is more reliable and more powerful. I bought this because for my needs that was enough (to install Kodi) and watch DVB-T.

May be a hardware version??? I didn't opened the device (because I will return to Amazon), but I am starting to think that there are more than one hardware version on motherboard or something with little diferences that are causing the problem...

King

It is said beelink are debugging Windows 10 RS1 version, but there are still a little bug, is expected to be released in mid-September RS1 system.As you say that, it is driven by the need to re-upgrade! We look forward to mid-September release system

albertoglezc

Does means that meanwhile we need to use 32 bit Windows 10 version with those drivers??? Really we need to reimage the device to install a wifi driver?

poul54

i did a clean install of the os and copied the nv ram txt to system32/driver and installed the 64 bit drivers from beelink   it works

Angel2k6

Sorry poul.. What have you done? Do you have a 64bit system?

poul54

yes i have 64 bit system, did a clean install .......  the drivers from here https://mega.nz/#F%21sllSkZYR%21fV19fXLWYerHNmqS36YulA
and NV ram text from here http://bee-link.com/forum.php?mo ... 4OXwxMzczMXwyNDI%3D

albertoglezc

poul54, the first link (the drivers link) it's the BIOS v16 link. Can you provide the correct driver lin, please?

albertoglezc

poul54 replied at 2016-09-23 18:12
sorry  here you go  https://mega.nz/#F!XQMGyIKC!YeFd_SfoKs43m1wFXxaghA

Thanks poul54, I will try it, but I think it's the same driver I tried about a couple of days ago... Maybe the order I am trying is not the best and it's the problem...

A couple of days ago I tried with a Windows 10 PRO fresh Install. After that, a lot of devices weren't detected. I installed all the codecs and audio drivers (without any problems). Finally I got stuck in the same point that I was on the BT3 Image. A device called "Broadcom Serial Bus Driver over UART Bus Enumerator" (I thing it's related with Bluetooth) and sometimes two "bcmfn2" devices (maybe they are bluetooth device) and the WLAN "Broadcom Wireless SDIO Adapter". I tried to put the .txt inside the system32\drivers before installing the driver, after that and disabling/enabling the device. Disabling the device and rebooting and after that enabling... All without any success...

I saw that bcmfn2 .INF file was inside the WLAN driver but always I got the same error: Error -10 or error 51. I think the problem is "Broadcom Serial Bus Driver over UART Bus Enumerator" driver, but I cannot install any driver that enables this device.