Firmware update and device now bricked

sscherrer · Post time 2017-04-23 14:27:28

Hi,

I applied the BIOS update from Windows. All went ok. After retsart the device simply does not start anymore. I get blue led from power on and nothing else, not even to BIOS now... I can't do anything.

Is there a way to force reflash the BIOS from a SDCARD or USB in such situation or is it simply bricked ?

Thanks

jedai · Post time 2017-04-30 21:23:47

Hello Friend. Now there are at least two of us. Similarly - downloaded from the topic below, launched. I was very surprised that the firmware started without confirmation. Now it's brick. I have not yet found a solution.

jedai · Post time 2017-05-03 17:19:21

Im found a solution.

Newbee · Post time 2017-05-06 00:38:48

If i'm not mistaken, Z83II and BT3II are not the same units...

pcuttle · Post time 2017-05-25 09:22:18

Jedai, what was your solution?

Magendanz · Post time 2017-05-28 09:56:22

I posted a bunch of information on how to recover after a bad BIOS flash using a SIOC 8-pin test clip and an EEPROM programmer, but that's all been deleted now. <sigh>

Newbee · Post time 2017-05-28 15:23:39

Edited by Newbee at 2017-05-31 02:08

The thing which is driving me nuts is that there was almost no support from Beelink. It was rather user-to-user support and they deleted that part of the forum anyway...

Max2306 · Post time 2018-02-10 03:19:52

Same here, bricked after bios update. Is there an solution.

poup99 · Post time 2018-03-16 02:34:24

Same here, bricked after bios update. Beelink support = 0. Clear in any laguage. Not heaven telling us to buy something else.

GFRene · Post time 2018-08-22 15:38:24

Exactly the same problem I have now also. is the Mini PC now gone or can you still save the

Firmware update and device now bricked

Viewed forums