GT1 Ultimate bricked

danwet

Hello, I tried to do the OTA update on my GT1 Ultimate, but that didn't work (as we know).

Then I tried a local update through the launcher, but that stopped in the middle telling me that there was an error.

Then I unplugged the Beelink and powered it up again and then it brought me to the recovery screen. I tried a factory reset, but I get the message that the /misc directory could not be found.

Then I prepared an SD Card with the latest firmware (GT1_311MO), put that in the GT1 and now it does not output anything anymore to HDMI, it's just a black screen. I don't know what the GT1 does with the SD Card, the power light just stays on and it doesn't do a thing -- so it seems.

My GT1 Ultimate seems to be unusable now and I'm out of solutions.

Could you please help me? What should I do next?

Best,
Daniel.

ECGT80

Use Burn Card Maker, only works with SDCARD and no usb memory.

danwet

ECGT80 replied at 2017-08-01 00:25
Use Burn Card Maker, only works with SDCARD and no usb memory.

I used that tool to make an SDCARD with GT1_311MO on it, but when I insert it and reset on the bottom of the GT1 nothing happens and the screen stays black.

beelink

dear , I will sent a email to you , waiting for my news . :hug:

Phant0m``

ECGT80 replied at 2017-07-31 12:25
Use Burn Card Maker, only works with SDCARD and no usb memory.

Your wrong. That utility makes bootable SD Card by using the EPROM file. Perhaps little research before making claims..

jacomiz

beelink replied at 2017-08-01 19:32
dear , I will sent a email to you , waiting for my news .

Hi,

I have the same issue and behavior of my GT1 Ultimate, led on, no hdmi signal, nothing happens. Could you please send also to me the email?

jacki

beelink replied at 2017-08-01 19:32
dear , I will sent a email to you , waiting for my news .

I have the same issue and behavior of my GT1 Standard, led on, no hdmi signal, nothing happens. Could you please send also to me the email?

FFeri

beelink replied at 2017-08-01 19:32
dear , I will sent a email to you , waiting for my news .

Hi,

Unfortunately my GT1 Ultimage is also bricked (white led light, no HDMI signal or any sign of normal operation.

Please contact me as well.

Thank you.

boydcustom

Hi,

Unfortunately, my GT1 Ultimate is also bricked (white led light, no HDMI signal or any sign of normal operation.

Please contact me as well.

Thank you.

Francky_B1

Hi,

Looks like my GT1 Ultimate is also bricked (white led light, no HDMI signal or any sign of normal operation.

Please could you contact me as well, and help how can I fix it

Thank you.