Firmware update faild

mke

Hello I tried to update to the latest firmware. Everything started smoothly showing the android robot. Then the srcreen went black and never recovered.
Turning the device off and on again the screen remains balck. HW reset does not work. what can i do to recover my GT1
Marc

beelink

ok , you can update the latest firmware again , I will contact with you later  by  email .:loveliness:

george0088

gt1 ultimate freezes all time after an ota update.
I do not recommend it. No help from beelink. The box not working

Phant0m``

george0088 replied at 2017-06-26 16:58
gt1 ultimate freezes all time after an ota update.
I do not recommend it. No help from beelink. The ...

You can downgrade. If it worked previously without freezing, should work again.

Anyways I've upgraded multiple GT1 Ultimate boxes, none exhibited the freezing issue afterwards.

If you experience freezing even after an downgrade, you likely have an defective box.

karurosu15

I have the same faild :(

george0088

Phant0m`` replied at 2017-06-27 09:08
You can downgrade. If it worked previously without freezing, should work again.

Anyways I've upgr ...

thank you dear phant0m for your help
i have tried to downgrade the firmware from the settings and via factory reset but nothing.
the same problem have many users with the gt1ultimate is this forum.
beelink suggest to reflash the firmware with usb burning tool but seems to not working.

Phant0m``

When I said downgrade, I meant that you use the SD card method with the previous firmware release. :P