|
|
I have made this easy tutorial for noob and people like me who are ...... to wait for a new firmware from beelink (2 month now and still nothing...)
Thx to Superceleron for that nice rom.
THIS ROM IS ONLY FOR THE TVBOXES WITH 9377 WIFI CHIP SN: STARTING ON THE GT1 BY S912.
For more information, go in the official topic here.
_________________________________________________________________
STEP 1 (download and extract).
Download :
Burn Card Makerand Beelink GT1 Superceleron BETA V5 Rom
Extract "TF.rar" and "SC-V5-BETA-GT1.zip" in the same folder.
Now you get "Burn_Card_Maker.exe" and "SC-V5-BETA-GT1.img" file.
Put a microSD card in your computer (on Windows) and go to the second step.
STEP 2 ("make" the microSD card)
Run "Burn_Car_Maker.exe"
The first time it's in chinese, click on the top lef menu, click on the second option, check "English" and put "OK".
Close and restart "Burn_Car_Maker.exe"
Chose disk: (Letter of your microSD card)
"YES" must be check 3 times for "To Partition and Format", "erase_flash" and "Reboot" (erase_bootloader must be uncheck).
Click on "Open" and chose "SC-V5-BETA-GT1.img"
Click on "Make", format the microSD card (default settings), after that the rom copy begin on the microSD card, when it's done you get a "Success" message.
STEP 3 (installation)
Now, insert the microSD card in the Beelink GT1 (power supply unplug/off).
Let your TV on and the HDMI cable plugged.
With a paper clip or other, press the reset button and hold it (small hole under the box), in the same time plug the power supply on the Beelink GT1.
The installation process begin, remove the paper clip and wait.
______________________________________________________________
|
|
发表于 2017-01-09 02:13:09
楼主
