Hi. What is your problem Beelink Team? Why do not you help me?

parasomnia · Post time 2017-06-13 06:26:17

Edited by parasomnia at 2017-06-13 06:27

hi.My device gets corrupted after ota update. Now just burn the white led. But no image. can you help me. Amlocig burning tool is not working. It did not work with sd card. Usb TTL firmware recovery? Ssh puTTY? My device was broken because of the wrong ota software. And that makes me angry. I wrote a mail, but you did not do it in translation. If it does not help, do not sell it. Thanks. My Mail adress odenizmen@gmail.com - omerdenizmen@hotmail.com / skype: parasomnia

parasomnia · Post time 2017-06-13 06:31:20

my board.

khalid · Post time 2017-06-13 08:56:30

cannot see any image you attach...

can you explain more..
- what model of your box,
- you current firmware before you update thru OTA
- you try do factory reset
- are using 2.0.5 usb burning tool

boh100 · Post time 2017-06-13 22:06:51

I'm in the same situation! I have GT1 Ultimate G912 and tried to flash 313 firmware from 311 with USB_Burning_Tool 2.0.5.15 build 8. Now GT1 stuck on boot. I also tried Burn card maker and the problem persist. I looked into recovery log, maybe the problem is the bootloader because bootloader has null argument and gt1 can't mount some partition.
I think the problem is that because if i try to flash superceleron's rom, so custom rom, it work! It's incredible!!! A custom rom work but not work the official rom build by technicians. Please beelink look into bootloader and if someone can help please tell us.

miticofuro · Post time 2017-06-14 01:25:46

boh100 replied at 2017-06-13 22:06
I'm in the same situation! I have GT1 Ultimate G912 and tried to flash 313 firmware from 311 with US ...

incredible

parasomnia · Post time 2017-06-14 08:18:11

Beelink team. Why not help? What's so hard? Give me back my money. The software you have provided does not work after the software. Do not publish software without testing.

parasomnia · Post time 2017-06-14 08:25:05

khalid replied at 2017-06-13 08:56
cannot see any image you attach...

can you explain more..

The device is not working. Only white light. The usb tool is not working. The sdcard maker is not running.

Phant0m`` · Post time 2017-06-14 08:44:48

parasomnia replied at 2017-06-13 20:25
The device is not working. Only white light. The usb tool is not working. The sdcard maker is not ...

Don't expect that to work. You incorrectly removed the plate, and it looks like you physically damaged the processor. ... I could be wrong though ;P

parasomnia · Post time 2017-06-15 04:52:15

Previously i got the firmware with mx 812 processor putty. But I forgot the commands :( this device is not their own production, so they can not answer.copy device.GT1:@

beelink · Post time 2017-06-15 11:09:26

calm down baby , I am writing an email to solve your problem now . :hug: