MII-V doest not boot from M2.SSD

bilge · Post time 2020-10-12 19:01:38

beelink replied at 2020-10-09 14:14
Does your machine have a small hole, which is a small hole for resetting the Bios. Please press th ...

yes there is a button and i did reset but still same not detected. I guess you better reproduce the problem at your side first rather than trial and errors

beelink · Post time 2020-10-13 09:41:05

bilge replied at 2020-10-12 19:01
yes there is a button and i did reset but still same not detected. I guess you better reproduce th ...

Sorry, because we did not reproduce the problem on our machine, so we can only ask you more for inquiries. When we use it, everything is normal. At present, I am discussing the solution with the technician for your problem, please wait for me

beelink · Post time 2020-10-14 11:30:09

bilge replied at 2020-10-12 19:01
yes there is a button and i did reset but still same not detected. I guess you better reproduce th ...

Sorry, we need your help again. Please unplug and plug the SSD again. If it is not recognized, please try whether the SSD can be recognized by Bios on other devices.

bilge · Post time 2020-10-14 18:32:30

beelink replied at 2020-10-14 11:30
Sorry, we need your help again. Please unplug and plug the SSD again. If it is not recognized, ple ...

What you say is not meaningfull. It is installed below the heatsink. Not easy position to remove and replug I dont have any other device to test it. It is recognized under Windows so M2.sata Works fine

beelink · Post time 2020-10-16 09:51:53

bilge replied at 2020-10-14 18:32
What you say is not meaningfull. It is installed below the heatsink. Not easy position to remove a ...

Sorry, we are actively discussing this issue with the technicians, but our progress here is not good, because we cannot reproduce the problem. Please forgive us. When did you buy your machine?

And is your M.2 SATA used in other machines before? Or a brand new one just purchased

If it has been used before, whether the system has been installed before and whether the SSD has been manually partitioned

Please try to unplug the cmos battery to reset it, the following is the tutorial

https://beelink-my.sharepoint.co ... JlKUntaOeg?e=18tUO1

Then please take a photo of your Bios version and show me

Thank you

bilge · Post time 2020-10-21 18:54:00

Edited by bilge at 2020-10-23 18:23

beelink replied at 2020-10-16 09:51
Sorry, we are actively discussing this issue with the technicians, but our progress here is not go ...

Did CMOS reset. Still same M2.sata is not detected.
It is brand new. Just cloned the Windows from MMC to M2.sata with clone SW inside Windows 10.
I bought the MII-V from Aliexpress SZBOX store on 11.11.2019