flash with pin short circuit method

wooda · Post time 2019-01-09 15:56:19

I can not restore the firmware with "usb burning tool" with usb cable or with sd method, someone knows which pins you need to short-circuit to reset like on the GT1 Ultimate?

Vodila077 · Post time 2019-01-09 19:44:25

Does the led light come on when usb is connected?

Vodila077 · Post time 2019-01-09 19:51:29

There should be 3 files.

Vodila077 · Post time 2019-01-09 19:52:55

Edited by Vodila077 at 2019-01-09 19:55

wooda · Post time 2019-01-11 02:13:41

Vodila077 replied at 2019-01-09 19:44
Does the led light come on when usb is connected?

yes the led light is on when I connect the txbox with the usb cable to the pc

wooda · Post time 2019-01-11 02:17:07

Vodila077 replied at 2019-01-09 19:52

What should I do?
What does it do with the question I asked ??

Vodila077 · Post time 2019-01-11 02:57:55

My telegram @vodila077, I'll help you.

Magendanz · Post time 2019-02-21 07:11:16

If you're talking about recovering a "bricked" box in Mask ROM Mode by shorting pins on the eMMC, that's a bit of an art that requires knowledge of the NAND chipset or some experimentation. I would first try locations that worked with other Amlogic S905X2 (u211 reference board) devices. Some are posted on this FreakTab topic:

https://forum.freaktab.com/forum ... mode-short-location

Disant · Post time 2019-05-17 16:48:20

Jush short this pins and connect to USB2 by A-A cable with started UBT.

jdorigao · Post time 2022-01-01 22:43:11

Could you tell me which pins for GT-King are?
Grateful in advance!